Anyone local to St austell that can remove this rubbish from my aprilia?
Cheers.
datatool 3 removal
Moderator: Staff
datatool 3 removal
IF MY KNEE TOUCHES THE FLOOR, I'VE FALLEN OFF
-
Mervin
- Learner Driver
- Posts: 4762
- Joined: Nov 18th, '05, 19:42
- First Name: mervin
- Location: near bideford
Re: datatool 3 removal
Contact TLS Moose , he is removing one i think from his bike
Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles,
Hunter S Thompson
Hunter S Thompson
Re: datatool 3 removal
We removed one from my zx6r 09 last month and was quite easy to remove. As was just 7 black wires all wired in to the lighting circuits as an alarm.
The 636 and zx9r were immobiliser also and were wired in to the main harness
Any auto electrician should be able to do it well as its just a case of connecting up the wires which have been spliced if any.
Did an acumen a meta and a datatool and all 3 were easily removable . The hardest part probably was removing the panels to show the wiring.
What age of bike is it? (Carbs or fuel injection?
The 636 and zx9r were immobiliser also and were wired in to the main harness
Any auto electrician should be able to do it well as its just a case of connecting up the wires which have been spliced if any.
Did an acumen a meta and a datatool and all 3 were easily removable . The hardest part probably was removing the panels to show the wiring.
What age of bike is it? (Carbs or fuel injection?
"Welding is like cheese on toast! It gets hot and sticks together"
Re: datatool 3 removal
It's a 2004 gen 1 aprilia tuono, it's fuel injection, I've seen a page where the block connector is bridged with 2 pins but not sure I want to try it.
Just want the thing taken on so I can smash it with a lump hammer.
Just want the thing taken on so I can smash it with a lump hammer.
IF MY KNEE TOUCHES THE FLOOR, I'VE FALLEN OFF