I have just replaced the sparking plugs on my Yamaha Virago 535 and noticed they are very white, I seem to have to ride with the choke partly closed so I suppose the jets must be restricted.
I have bought some carb and choke cleaner to spray in the intake but guess I will probably end up stripping the carbs and cleaning the jets, It has been suggested to use several things to such as, vinegar, soda, cilit bang, WD40 or run a fine wire through them.
Has anyone had to do this to their bike and what did you use ?
weak mixture
Forum rules
No piss taking or stick poking from those who do, or think they know more.
ANY ABUSE WILL BE REMOVED, RECYCLED AND FIRED BACK WITH A BIG FRICKIN GUN.
No piss taking or stick poking from those who do, or think they know more.
ANY ABUSE WILL BE REMOVED, RECYCLED AND FIRED BACK WITH A BIG FRICKIN GUN.
- billinom8s
- Site Admin
- Posts: 20538
- Joined: Sep 10th, '05, 22:31
- First Name: simon
- Location: Teignmouth
Re: weak mixture
I would take it to tivertonMotorcycles and get jam to get the unit dunked into the ultrasonic tank.
Check your mixture first though, make sure you have checked your fuel/air screw setting first though.
Check your mixture first though, make sure you have checked your fuel/air screw setting first though.
07977507395

don't forget we are onX and Instagrambelieve it or not !!!
southwestbikers@southwestbikers (original, I know.
KTM 1290 SDR
KTM 690 supermoto smc R,
Zx10r trackbike,
ktm 350 excf muddy
Suspension and bike work undertaken.

don't forget we are onX and Instagrambelieve it or not !!!
southwestbikers@southwestbikers (original, I know.
KTM 1290 SDR
KTM 690 supermoto smc R,
Zx10r trackbike,
ktm 350 excf muddy
Suspension and bike work undertaken.
Re: weak mixture
Thanks for the rely, I have tried the carb/choke cleaner and that seems to have cured it.
There appears to be no mixture screw on carbs or shown in manual, must be pre-set in manufacture.
I have looked at the website for Tiverton motorcycle and if it plays up again I will contact them.
Cheers Mandolin
There appears to be no mixture screw on carbs or shown in manual, must be pre-set in manufacture.
I have looked at the website for Tiverton motorcycle and if it plays up again I will contact them.
Cheers Mandolin
- MellowYellow
- Learner Driver
- Posts: 3592
- Joined: Mar 15th, '14, 14:06
- First Name: Larry
- Location: Bristol
Re: weak mixture
Don't know that model in particular but generically, it could be vacuum pipes blocked or advance / retard springs / mechanism sticking.
....If you have them of course....
....If you have them of course....
Have you noticed that anyone going slower than you is an idiot, and anyone going faster is a maniac ?